Reconstruction record (a diary -- a thing)
2000/04/30 Apollo133A -- AGP -- asynchronous -- it tested The result was useless.
2000/04/10 In order to set a bulletin board to KY-VIEW, it moved in the site.
2000/03/21 Since reconstruction would carry out also except BX, expression of the whole page was corrected. Moreover, since the form of Dual of why or Tekram had mistaken, it corrected secretly (smile).
2000/03/20 It converted after a long time. It is Intel cc820 used as non-converted stock. Although it regarded as ? whether AGP would be completely asynchronous and it would move and it converted when carrying out 820 by accident, since AGP clock had become a circuit like PCI clock which it is supplied from PLL and said by BX unlike BX, it did not come even out of BIOS screen with regrettable (it cries).
2000/03/03 It moved by convenience in the site. Moreover, it may move.
2000/01/07 Recently, renewal of a page is troublesome and is not doing. Since it is writing to the bulletin board when experimenting, it understands that what is necessary is just to have a past log seen. It updated in order to reflect the contents of a bulletin board in a page this time.
1999/12/01 Although it thought that the detailed method of reconstruction would be photographed and carried by the digital camera, since Mr. kei had the page of description of PCI reconstruction made from beforehand, I am allowed to link. Luck!!!
1999/11/18 It carried out to the Kanto off meeting of other-day K-lab, and when the output of the place which asked Mr. ROBIN detailed in an electronic circuit the talk, and 74AS04 was connected to direct PCI or AGP, it was said that IC of PCI connected by the case or AGP might break. Although it was not related without the problem in the direction carried out operation, now when it was, it was a talk that what is necessary is just to move an element according to about [ 4.5V ] on both sides of a diode between an oscillator, the power supply of 74AS04, and 5V. Since the circuit diagram was added to the page of reconstruction, please have a look.
With it, the report of asynchronous reconstruction of PCI/AGP will appear in the magazine of Softbank publishing incorporated company of sale "DOS/V magazine CUSTOM" on November 18. Please read.
1999/10/12 Since the mother board of the slot 1 of ZX of Tekram sold, he buys it involuntarily and an asynchronous test is carried out (it operated). Since BH 6-1.1 had little pressurization of I/O voltage, it was come [ FSB ] only out of 140 and needed. 3. 3V system was raised to 3.7V, the fan was attached also in BX tip, and the place (since it became that it is likely to move, it stops, and there is nothing and he buys it) which attached the blizzard to CPU, and 450MHz of P3 operated by FSB155MHz (FinalRealty was moved and tested only once). reference -- P3 -- 99300185-0345 (4ns of Toshiba) -- core voltage 2.3V and a memory -- TC-10P of HYUNDAI, and VGA -- S3Savege3D -- 170 M bytes of Quantum with old Savege and HD, and FD -- it released and the power supply was a doubtful power supply of 230W currently sold at the joint establishment electron
1999/09/27 Although Diamond Micronics C400 was purchased in order to conduct an experiment of a high clock, since only 66 and 100 were attached, FSB was troubled (smile). Since it was unavoidable, operation with the place and splendid high clock which connected and tested external PLL was expectable. However, it was defeated by the place which regarded as the maximum of CPU operation being investigated and was regarded as L2 cash being turned off, and the thing which does not have an item in BIOS (burst of laughter). Since it was unavoidable, ABIT BH 6-1.1 was purchased on the 25th, and asynchronous reconstruction was performed instantly.however, although asynchronous operation was carried out, BH 6-1.1 tries to want to separate from BX tip -- it came out, the operating characteristic in a quantity clock was bad, and FSB140 was a limit (tear). Now, it is troubled very much.
1999/09/04 Before disposing of P6B40D-A5 of Tekram, the wiring with which it was tampering by way of precaution for the check at the time of failure was not broken when the repair operation check was performed. It seems that having thought that it broke has been convinced since failure of the wiring at the time of the workmanship and the test of a daughtercard has overlapped and got impatient. Diamond Micronics C400 is asynchronous in AGP -- it converted into 66MHz.
1999/08/30 In fact, while P6B40D-A5 of August 28Tekram converts, it dies. Since it is unavoidable, Diamond Micronics C400 is purchased, and the present continuation is performed. Reconstruction is accident responsibility,<- different, It is self-responsibility. (cautions: Un-synchronizing did not break owing to.)
1999/08 PCI of P6B40D-A5 of Tekram is moved [ now, ] by 34MHz, and AGP is moved by 68Mhz fixation. CPU -- Celeron300A -- two pieces -- FSB83MHz -- it is -- a memory -- 64 M bytes and HD -- 4 of SCSI -- GBytes and CD -- CD-R of SCSI -- video -- AGP -- S3Savege3D 8 -- MByte and SCSI are putting in Tekram DC-310 (notes: DC-310 of Tekram are the card with which PCI clock stops operating by about 36MHz.) Since the main board out of order from the first is converted, it does not understand well whether it is moving normally. although it may have been locked several times once in the part which is not likely to be with regards to reconstruction portions, such as software and a driver, -- the asynchronous operation itself -- being alike -- it is the touch which is likely to be satisfactory. In addition, since it does not have the honest sound card which is dual and moves, the sound has not been tested (undecided).
1999/??/?? Asynchronous reconstruction was performed for AGP of P6B40D-A5 of Tekram to 68MHz.
1999/??/?? Asynchronous reconstruction was performed for PCI of P6B40D-A5 of Tekram to 34MHz.
199?/??/?? P6F91i Scorpion of Freetech was experimented in PCI by 34MHz fixation. However, although it operated well, since FSB did not operate by 133MHz, it returns.